Sr Process Engineer-Very Attractive Package!!

Process Specification of Mechanical Equipment and Instrumentation:
Familiar with WorleyParsons standard process calculations (or
equivalent) and the equations/logic behind them, and WP design
guides (or equivalent), to enable process sizing of:
Compressors (centrifugal and reciprocating) Gas Turbines
Glycol contactors and regeneration units
Fuel gas packages
Nitrogen packages
Potable water makers
Drain sump caissons
Produced water treatment packages, including hydrocyclones
Selecting operating pressures for gas/liquid production systems
sound knowledge of the inputs required and the ability to accurately
and independently source this data, especially when there are
multiple H&MB cases,
A sound knowledge of the calculation required, including the
equations used by any standard WP spreadsheets utilized
the confidence to check a calculation in compliance with the RWP
quality assurance standards
the confidence to check the final deliverable eg datasheet resulting
from the calculation ,Minimum Academic Qualifications

1). Degree in Chemical Engineering or equivalent, from an
institution recognized by the IChemE as suitable to enable progress
to Member status. Other potentially acceptable qualifications are B.
Tech. (Chem. Eng) and B. Sc. (Chem. Eng.).

A degree in Mechanical Engineering from a recognized institution may
be considered, at the discretion of the Process Manager.

2). Membership of IChemE (or equivalent), though not
mandatory, is highly recommended.

Minimum Postgraduate Experience

10 years in hydrocarbon industry.

Minimum Oil and Gas Related Experience

Minimum of 7-10 years specifically in process design.

Minimum of 3 years specifically in process design of upstream
facilities.

Please forward your Cv to Sajid.Khan@WorleyParsons.com